EcoOnline Blog | Stay One Step Ahead with EcoOnline’s EHS Blog for Safety Professionals

Safety Data Sheet Authoring Best Practice

Written by Laura Fitzgerald | 09. May 2023

Safety data sheets (SDS) are a vital requirement for businesses where employees’ contact with chemical substances can occur. As you might expect,  an SDS must comply with strict regulations in most jurisdictions and should be subject to constant revision and updates, therefore, Safety Data Sheet Authoring within an organisation is vital.

However, keeping potentially hundreds of safety data sheets updated is a time-consuming task, made all the more onerous by differing national requirements.

In a recent webinar EcoOnline Consulting Manager Sarah Ingle and Solutions Consultant Jack Cleaver took a closer look at some of the most common pitfalls in SDS authoring and how to overcome them. Continue reading for their key takeaways!

Some background on SDS Legislation


Before diving into our speakers SDS authoring best practice tips, its worth having a quick look at how legislation effects their content.

The majority of international SDS legislation is based on the Globally Harmonised System of Classification and Labelling of Chemicals (GHS), which has been adopted by 65 countries as of recording. It is currently on its 9th revision.

However as the GHS is not a law, this has led to inconsistent application across different countries. Certain countries may be operating on older revisions to the GHS, which can lead to SDS’ that are substantially different to those based on the most recent revisions made in 2021.

This highlights an important fact: 1 single SDS will not be appropriate for all territories.

The Brexit Example


A defining example of the challenges posed by different applications of the GHS is seen in post-Brexit UK and EU requirements. While some of the EU’s REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) and CLP (Classification, Labelling and packaging of substances and mixtures) regulations have been adapted in the form of UK REACH and GB CLP, they do not perfectly match.

Since January 2021, the EU has adopted new changes to SDS' including updates to information on endocrine disruptors and nanoforms of substances. These changes have not been introduced the UK, although it should be noted that Northern Ireland will continue to comply with EU REACH requirements.

Its easy to see how all of this can make the SDS authoring process more complicated, but two key things to remember:

  1. One single SDS is not compliant for UK REACH and EU REACH.

  2. If you are an importer of chemicals you need to ensure the safety data sheets comply with local legislation before placing on the market.

Tip 1: Make sure ALL sections of a safety data sheet are completed


“We have to consider at the end of the day that people are actually using these safety data sheets to determine what safety measures they need to put in place. They are using them to create COSHH and chemical risk assessments, they are using them to determine what PPE is required to protect staff, emergency services are using the information to determine what to do in the event of an accident”

A major problem that EcoOnline consultants like Sarah have encountered in client SDS' is missing information or the inclusion of generic statements. All sections of an SDS should be fully completed with the most accurate information available. 

Reputable information can be sourced from; raw material safety data sheets, testing data, manufacturer data, literature data, regulatory data bases. Remember that it must be specific to your product. Do not rely on a google search for your information, especially when it comes to mixture SDS’.

When writing your SDS, avoid the use of jargon or abbreviations and acronyms – use clear, concise language to convey the information. Avoid using vague language like “no other information”, “may be dangerous”, or “none known”.


Example of fully completed data fields 


Example of incomplete data fields

*Remember that ‘trade secrets’ is not a valid response under EU REACH or UK REACH, unless suppliers have successfully applied to the relevant authorities.


Tip 2: Keep information consistent throughout your SDS


Information must be kept consistent throughout all sections of an SDS. For example, if you include a corrosive hazard pictogram in Section 3, it would be incorrect to use the term ‘May cause irritation’. The Classification in Section 2 must agree with the information provided in Sections 9 to 12. 

Some key things to consider:

First Aid: The precautionary statements listed in Section 2.2 of the SDS must correspond to the first aid measures listed in Section 4 of the SDS. Inconsistencies might lead to incorrect first aid measures being provided.

Chemical Storage: Section 7 of the SDS provides information on Handling and Storage. This should correspond to the use of the chemical listed in Section 1.2 and to the properties of the chemical listed in Sections 9 and 10. It is also important to take note of any information listed in Exposure Scenarios.

PPE: The PPE chosen to be listed in Section 8.2 of the SDS must reflect the hazards listed in Section 2 of the SDS as well as the ingredients listed in Section 3.

An SDS authoring system can simplify the process by providing a classification based on substance formation you input.

Tip 3: Keep your SDS’ updated


As legislative changes and updates to regulatory lists are very common, suppliers need to ensure that their SDS' are updated. A supplier MUST immediately update a SDS if:

  • New information becomes available on the hazards of a substance/mixture or on the risk management measures that need to be taken.

  • An authorisation has been granted or refused for a substance.

  • A restriction has been imposed

Note that SDS' only have to be updated if specific situations occur. In the case of new legislation, there is typically a 2 year grace period to comply. Suppliers also have to provide customers with an updated SDS if they have purchased the product in the previous 12 months. Dedicated software and newsletters can greatly assist in keeping track of these changes.

Tip 4: Make sure your translations are accurate

Within the EU SDS must be provided in an official language(s) of the Member State where the chemical is placed on the market. Unfortunately, many suppliers do not comply with this measure. 

Translations can be a cumbersome requirement for suppliers who sell in multiple jurisdictions. A run through google translate is not enough here – the translation must make sense in context to the reader. Relying on third party providers who are unlikely to understand relevant legislation is also a common problem seen by our consultants.

A good SDS authoring software that doesn’t rely on machine translations can help to alleviate the strain of this requirement.

Conclusion

Keeping on top of all requirements when creating safety data sheets can be a fulltime job in itself. Using a cloud-based system like ALMEGO to create your SDS saves both time and effort while ensuring you remain compliant.

The ALMEGO system supports over 48 languages, CLP calculations and the creation of hazard labels. Users can also generate Unique Formula Identifier (UFI) codes and submit directly to ECHA via our API.