Lone Worker Low Signal Mode | EcoOnline US

    Lone worker low signal mode protects staff in areas of low or no signal


    Lone worker, powered by StaySafe, offers more coverage than any other lone worker app. Low signal mode comes as standard for all app users.

    See how it works
    Group of devices using satellite mode

    Lone worker low signal mode keeps staff safe wherever they work or travel


    We all experience poor mobile signal from time to time so we know employers can be concerned about how to keep employees protected in these circumstances.

    To help keep you connected, our lone worker app comes with an automatic Low Signal Mode, which means that lone workers are protected even in areas with limited connectivity.

    Low signal mode switches seamlessly between all available connections to offer the very best level of connectivity and protection to your lone working employees.

    Over 100,000 employees kept safe globally every day 

    More coverage than any other lone worker app 

    The easiest to use lone worker app on the market 

    Be up and running in less than 24 hours

    Demonstration of StaySafe satellite functionality on devices

    When Low Signal Mode is active, the app only needs a single bar of signal to maintain communications with the monitoring hub.

    In addition, missed check-in alerts still signal in the hub even if the employee has lost signal coverage completely. 

     

    Rainbow trust logo
    Google logo
    kier logo
    Suez logo
    Celtic Anglian Water logo
    Mind logo
    ANZ logo
    TeamHEALTH logo
    Country and outback health logo
    hafod housing logo
    moorabool shire council logo
    tas water logo

    When you give your staff lone worker low signal mode, you give them more coverage than any other lone worker app. 

    EcoOnline's lone worker app switches seamlessly between all available connections to offer the very best level of connectivity and protection for your lone workers. 

    • If the app cannot connect to data or Wi-Fi, low signal mode is automatically activated 
    • In low signal mode, nothing in the app or hub changes, but communications are sent via SMS 
    • See the safety status of your employees in real-time, in one place, and customize reporting lines and escalation procedures 

    Low Signal Mode is a vital method of communication.

     

    High speed mobile data and Wi-Fi will always be the app’s preferred connection, but in areas where connectivity is limited, Low Signal Mode is automatically activated. While in Low Signal Mode, session communications will continue to be sent to the hub via SMS. Alerts and session functions will continue to operate as usual, with location data updating if an alert is triggered.

    StaySafe Lone Worker logo
    Working data connection

    High speed data connections such as Wi-Fi, 5G and 4G will always be prioritized by the lone worker app.

    StaySafe Lone Worker logo
    Reduced connectivity

    If lone workers operate in areas where a Wi-Fi or data connections are limited, the lone worker app will automatically switch to Low Signal Mode. While in this mode, session functions and alerts will continue to be sent to the hub via SMS. The users last known location will be shown in the hub and updated when an alert is triggered.

    StaySafe Lone Worker logo
    No signal

    Session Expiry and Missed Check-In alerts do not require connectivity. This means that as long as the employee begins a session while connected, alerts will be sent if they fail to check-in. This provides a no-cost solution when the signal is down.

    Ground Control logo
     

    Gary Summerfield
    HSQE Manager
    Ground Control

    Case Study

    "We face a number of challenges such as low signal and out-of-hours operations, finding a solution that ticked all of our boxes was important."

    Blog

    An Introduction to
    Greenhouse Gases

    Screenshot 2024-04-15 at 09.42 1
    Read it here

    Case Study

    Menzies
    Aviation

    image (11) 1
    Read it here

    Webinar

    Aligning the frameworks -
    how CDP and CSRD overlap

    CSRD ja EHS
    Sign up here
    phone showing lone worker App main page

    Low signal mode is a vital method of communication

    Upon starting a session, the lone worker is able to add notes relating to their work. If they know they will be entering areas with limited connectivity, adding details on their exact location could be particularly useful. Notes can be viewed in the hub to provide information that could help the monitor respond to an alert.

    Signal coverage can be reduced in: 

    • Some urban areas
    • Fields/rural areas

    For most lone workers in these areas, Low Signal Mode will enable you to continue to monitor their safety effectively.

    If your lone workers regularly travel to remote locations where there is no phone signal, our lone worker app works with satellite providers to offer reliable global coverage.

    See how it works